•

INEOS Grenadier: LED Side Flood Light

Roof Bar Mount · DTP Plug-In · Wide Flood Beam · 1 or 2 Light Kit

30 W
Per light
2,400 lm
Per light
IP68
Waterproof & dustproof
EXT3
Recommended DTP port

Wide-area flood illumination for camp, work, and recovery — using the Grenadier's factory roof bar and power system. The DVA LED Side Flood Light delivers 2,400 lumens of broad flood output per unit, pre-fitted with a DTP connector for direct plug-in to EXT3. No wiring runs, no drilling, no modifications to the vehicle.

2,400 lm · Wide flood beam
DTP plug-in · EXT3 rooftop port
No drilling · Factory roof bar clamp
IP68-rated · Aluminum with cooling fins
1 or 2 light · Kit options available

Flood Light vs Side Light — Which Do You Need?

This Product
LED Side Flood Light

Wide flood beam — broad, even area coverage. Best for camp setup, recovery operations, work zones, and site lighting where coverage close to the vehicle matters more than throw distance.

Alternative
LED Side Light

Focused spot/wide beam — directional trail illumination optimised for visibility at range. Includes snap-on yellow lens for fog and dust. Same DTP plug-in and roof bar mount.

Engineered for the Grenadier

  • DTP Plug-In Pre-fitted connector plugs directly into EXT3. No relay, no wiring runs.
  • Roof Bar Mount Precision-machined clamp. Driver or passenger side. No drilling. Hardware included.
  • 30W / 2,400 lm Broad flood beam. Aluminum housing with cooling fins. IP68 rated.

Installation

  • Clamp mounting bracket to factory Grenadier roof bar — driver or passenger side
  • No drilling, cutting, or modification to the vehicle
  • Plug pre-installed DTP connector into EXT3 rooftop port
  • 2-Light Kit: connect both lights through the included DTP splitter to one EXT3 port
  • All hardware and hex keys included — no additional tools required

Select Your Kit

1-Light Kit

One flood light — driver-side or passenger-side roof bar position.

  • 1 × 30W LED Flood Light (2,400 lm)
  • Grenadier roof bar clamp + bracket
  • Stainless hardware + hex keys
  • Pre-installed DTP connector
Best Value
2-Light Kit

Both sides — 4,800 lm total flood coverage from a single EXT3 port.

  • 2 × 30W LED Flood Lights (2,400 lm each)
  • Dual roof bar clamps + brackets
  • Stainless hardware + hex keys
  • Pre-installed DTP connectors
  • 1 × DTP splitter (both lights, one EXT3 port)

Specifications

Specification Details
Vehicle INEOS Grenadier (all trims)
Beam Pattern Wide flood
Power per Light 30W
Lumens per Light 2,400 lm
Total Output — 2-Light Kit 4,800 lm combined
IP Rating IP68 — waterproof and dustproof
Housing Aluminum with cooling fins
Connector Deutsch DTP (pre-installed)
Recommended Port EXT3 — 3 access points: above left front door, left rear door, and right rear door
Mounting Factory roof bar clamp — no drilling
Variants 1-Light Kit · 2-Light Kit (includes DTP splitter)

Frequently Asked Questions

1-Light or 2-Light Kit — which should I choose?
The 2-Light Kit is the better value if you want balanced flood coverage on both sides of the vehicle. Both lights run from a single EXT3 port via the included DTP splitter at 60W combined — within the Grenadier's safe factory output range. The 1-Light Kit is right if you only need one side, or want independent control of each side using separate EXT ports.
Which EXT port should I use?
EXT3 is recommended. It has three access points — above the left front door, above the left rear door, and above the right rear door — making it the most practical port for roof bar-mounted accessories on either side of the vehicle. The 2-Light Kit's DTP splitter lets both lights run from a single EXT3 port.
Does this require any wiring or drilling?
No. The DTP connector plugs directly into the Grenadier's factory EXT3 rooftop power port. The mount clamps to the factory roof bar. No new wiring runs, no drilling, no modifications to the vehicle.
What is the difference between the Flood Light and the Side Light?
The Flood Light uses a wide flood beam pattern — broad, even coverage suited to camp setup, recovery operations, and work zones close to the vehicle. The Side Light uses a spot/wide beam optimised for directional trail illumination at range, and includes a snap-on yellow lens for fog and dust conditions. Both share the same DTP plug-in and roof bar mounting system.
Does this fit all Grenadier trims?
Yes. Compatible with all INEOS Grenadier trims. The mount is precision-machined for the Grenadier's factory roof bar profile.

Why DVA Mechanics

Purpose-built for the Grenadier. Engineered for real-world off-road use.

Mount, plug in, drive. No universal adapters, no compromise — clean factory integration designed by owners who run the same gear.

Build Out Your Lighting System

Directional Beam
LED Side Light

Same DTP roof bar mount, spot/wide beam for trail use at range. Includes snap-on yellow lens. Single or Dual kit with DTP splitter.

View Product →Overhead Lighting
LED Roof Light Bar

Forward roofline lighting. Pair with flood side lights for full 270° coverage — all using the Grenadier's native DTP connectors throughout.

View Product →Forward Lighting
Front Bumper Light Kit

Factory-integrated bumper lighting — mount plus 3-light Cree bar (~110W, ~13,200 lm). Completes the forward coverage alongside roof and side lights.

View Product →
Compatibility: INEOS Grenadier (all trims, 2023–current). Recommended connection: EXT3 rooftop DTP port. 2-Light Kit includes DTP splitter — 2 × 30W (60W combined) from a single port.

INEOS Grenadier: LED Side Flood Light – Roof Bar Mount & DTP Plug-In

SKU I-LB-1F
$169.00
$139.00

INEOS Grenadier: LED Side Flood Light

Roof Bar Mount · DTP Plug-In · Wide Flood Beam · 1 or 2 Light Kit

30 W
Per light
2,400 lm
Per light
IP68
Waterproof & dustproof
EXT3
Recommended DTP port

Wide-area flood illumination for camp, work, and recovery — using the Grenadier's factory roof bar and power system. The DVA LED Side Flood Light delivers 2,400 lumens of broad flood output per unit, pre-fitted with a DTP connector for direct plug-in to EXT3. No wiring runs, no drilling, no modifications to the vehicle.

2,400 lm · Wide flood beam
DTP plug-in · EXT3 rooftop port
No drilling · Factory roof bar clamp
IP68-rated · Aluminum with cooling fins
1 or 2 light · Kit options available

Flood Light vs Side Light — Which Do You Need?

This Product
LED Side Flood Light

Wide flood beam — broad, even area coverage. Best for camp setup, recovery operations, work zones, and site lighting where coverage close to the vehicle matters more than throw distance.

Alternative
LED Side Light

Focused spot/wide beam — directional trail illumination optimised for visibility at range. Includes snap-on yellow lens for fog and dust. Same DTP plug-in and roof bar mount.

Engineered for the Grenadier

  • DTP Plug-In Pre-fitted connector plugs directly into EXT3. No relay, no wiring runs.
  • Roof Bar Mount Precision-machined clamp. Driver or passenger side. No drilling. Hardware included.
  • 30W / 2,400 lm Broad flood beam. Aluminum housing with cooling fins. IP68 rated.

Installation

  • Clamp mounting bracket to factory Grenadier roof bar — driver or passenger side
  • No drilling, cutting, or modification to the vehicle
  • Plug pre-installed DTP connector into EXT3 rooftop port
  • 2-Light Kit: connect both lights through the included DTP splitter to one EXT3 port
  • All hardware and hex keys included — no additional tools required

Select Your Kit

1-Light Kit

One flood light — driver-side or passenger-side roof bar position.

  • 1 × 30W LED Flood Light (2,400 lm)
  • Grenadier roof bar clamp + bracket
  • Stainless hardware + hex keys
  • Pre-installed DTP connector
Best Value
2-Light Kit

Both sides — 4,800 lm total flood coverage from a single EXT3 port.

  • 2 × 30W LED Flood Lights (2,400 lm each)
  • Dual roof bar clamps + brackets
  • Stainless hardware + hex keys
  • Pre-installed DTP connectors
  • 1 × DTP splitter (both lights, one EXT3 port)

Specifications

Specification Details
Vehicle INEOS Grenadier (all trims)
Beam Pattern Wide flood
Power per Light 30W
Lumens per Light 2,400 lm
Total Output — 2-Light Kit 4,800 lm combined
IP Rating IP68 — waterproof and dustproof
Housing Aluminum with cooling fins
Connector Deutsch DTP (pre-installed)
Recommended Port EXT3 — 3 access points: above left front door, left rear door, and right rear door
Mounting Factory roof bar clamp — no drilling
Variants 1-Light Kit · 2-Light Kit (includes DTP splitter)

Frequently Asked Questions

1-Light or 2-Light Kit — which should I choose?
The 2-Light Kit is the better value if you want balanced flood coverage on both sides of the vehicle. Both lights run from a single EXT3 port via the included DTP splitter at 60W combined — within the Grenadier's safe factory output range. The 1-Light Kit is right if you only need one side, or want independent control of each side using separate EXT ports.
Which EXT port should I use?
EXT3 is recommended. It has three access points — above the left front door, above the left rear door, and above the right rear door — making it the most practical port for roof bar-mounted accessories on either side of the vehicle. The 2-Light Kit's DTP splitter lets both lights run from a single EXT3 port.
Does this require any wiring or drilling?
No. The DTP connector plugs directly into the Grenadier's factory EXT3 rooftop power port. The mount clamps to the factory roof bar. No new wiring runs, no drilling, no modifications to the vehicle.
What is the difference between the Flood Light and the Side Light?
The Flood Light uses a wide flood beam pattern — broad, even coverage suited to camp setup, recovery operations, and work zones close to the vehicle. The Side Light uses a spot/wide beam optimised for directional trail illumination at range, and includes a snap-on yellow lens for fog and dust conditions. Both share the same DTP plug-in and roof bar mounting system.
Does this fit all Grenadier trims?
Yes. Compatible with all INEOS Grenadier trims. The mount is precision-machined for the Grenadier's factory roof bar profile.

Why DVA Mechanics

Purpose-built for the Grenadier. Engineered for real-world off-road use.

Mount, plug in, drive. No universal adapters, no compromise — clean factory integration designed by owners who run the same gear.

Build Out Your Lighting System

Directional Beam
LED Side Light

Same DTP roof bar mount, spot/wide beam for trail use at range. Includes snap-on yellow lens. Single or Dual kit with DTP splitter.

View Product →Overhead Lighting
LED Roof Light Bar

Forward roofline lighting. Pair with flood side lights for full 270° coverage — all using the Grenadier's native DTP connectors throughout.

View Product →Forward Lighting
Front Bumper Light Kit

Factory-integrated bumper lighting — mount plus 3-light Cree bar (~110W, ~13,200 lm). Completes the forward coverage alongside roof and side lights.

View Product →
Compatibility: INEOS Grenadier (all trims, 2023–current). Recommended connection: EXT3 rooftop DTP port. 2-Light Kit includes DTP splitter — 2 × 30W (60W combined) from a single port.
$169.00
$139.00

In Stock: 23 available

Quantity:

INEOS Grenadier: LED Side Flood Light

Roof Bar Mount · DTP Plug-In · Wide Flood Beam · 1 or 2 Light Kit

30 W
Per light
2,400 lm
Per light
IP68
Waterproof & dustproof
EXT3
Recommended DTP port

Wide-area flood illumination for camp, work, and recovery — using the Grenadier's factory roof bar and power system. The DVA LED Side Flood Light delivers 2,400 lumens of broad flood output per unit, pre-fitted with a DTP connector for direct plug-in to EXT3. No wiring runs, no drilling, no modifications to the vehicle.

2,400 lm · Wide flood beam
DTP plug-in · EXT3 rooftop port
No drilling · Factory roof bar clamp
IP68-rated · Aluminum with cooling fins
1 or 2 light · Kit options available

Flood Light vs Side Light — Which Do You Need?

This Product
LED Side Flood Light

Wide flood beam — broad, even area coverage. Best for camp setup, recovery operations, work zones, and site lighting where coverage close to the vehicle matters more than throw distance.

Alternative
LED Side Light

Focused spot/wide beam — directional trail illumination optimised for visibility at range. Includes snap-on yellow lens for fog and dust. Same DTP plug-in and roof bar mount.

Engineered for the Grenadier

  • DTP Plug-In Pre-fitted connector plugs directly into EXT3. No relay, no wiring runs.
  • Roof Bar Mount Precision-machined clamp. Driver or passenger side. No drilling. Hardware included.
  • 30W / 2,400 lm Broad flood beam. Aluminum housing with cooling fins. IP68 rated.

Installation

  • Clamp mounting bracket to factory Grenadier roof bar — driver or passenger side
  • No drilling, cutting, or modification to the vehicle
  • Plug pre-installed DTP connector into EXT3 rooftop port
  • 2-Light Kit: connect both lights through the included DTP splitter to one EXT3 port
  • All hardware and hex keys included — no additional tools required

Select Your Kit

1-Light Kit

One flood light — driver-side or passenger-side roof bar position.

  • 1 × 30W LED Flood Light (2,400 lm)
  • Grenadier roof bar clamp + bracket
  • Stainless hardware + hex keys
  • Pre-installed DTP connector
Best Value
2-Light Kit

Both sides — 4,800 lm total flood coverage from a single EXT3 port.

  • 2 × 30W LED Flood Lights (2,400 lm each)
  • Dual roof bar clamps + brackets
  • Stainless hardware + hex keys
  • Pre-installed DTP connectors
  • 1 × DTP splitter (both lights, one EXT3 port)

Specifications

Specification Details
Vehicle INEOS Grenadier (all trims)
Beam Pattern Wide flood
Power per Light 30W
Lumens per Light 2,400 lm
Total Output — 2-Light Kit 4,800 lm combined
IP Rating IP68 — waterproof and dustproof
Housing Aluminum with cooling fins
Connector Deutsch DTP (pre-installed)
Recommended Port EXT3 — 3 access points: above left front door, left rear door, and right rear door
Mounting Factory roof bar clamp — no drilling
Variants 1-Light Kit · 2-Light Kit (includes DTP splitter)

Frequently Asked Questions

1-Light or 2-Light Kit — which should I choose?
The 2-Light Kit is the better value if you want balanced flood coverage on both sides of the vehicle. Both lights run from a single EXT3 port via the included DTP splitter at 60W combined — within the Grenadier's safe factory output range. The 1-Light Kit is right if you only need one side, or want independent control of each side using separate EXT ports.
Which EXT port should I use?
EXT3 is recommended. It has three access points — above the left front door, above the left rear door, and above the right rear door — making it the most practical port for roof bar-mounted accessories on either side of the vehicle. The 2-Light Kit's DTP splitter lets both lights run from a single EXT3 port.
Does this require any wiring or drilling?
No. The DTP connector plugs directly into the Grenadier's factory EXT3 rooftop power port. The mount clamps to the factory roof bar. No new wiring runs, no drilling, no modifications to the vehicle.
What is the difference between the Flood Light and the Side Light?
The Flood Light uses a wide flood beam pattern — broad, even coverage suited to camp setup, recovery operations, and work zones close to the vehicle. The Side Light uses a spot/wide beam optimised for directional trail illumination at range, and includes a snap-on yellow lens for fog and dust conditions. Both share the same DTP plug-in and roof bar mounting system.
Does this fit all Grenadier trims?
Yes. Compatible with all INEOS Grenadier trims. The mount is precision-machined for the Grenadier's factory roof bar profile.

Why DVA Mechanics

Purpose-built for the Grenadier. Engineered for real-world off-road use.

Mount, plug in, drive. No universal adapters, no compromise — clean factory integration designed by owners who run the same gear.

Build Out Your Lighting System

Directional Beam
LED Side Light

Same DTP roof bar mount, spot/wide beam for trail use at range. Includes snap-on yellow lens. Single or Dual kit with DTP splitter.

View Product →Overhead Lighting
LED Roof Light Bar

Forward roofline lighting. Pair with flood side lights for full 270° coverage — all using the Grenadier's native DTP connectors throughout.

View Product →Forward Lighting
Front Bumper Light Kit

Factory-integrated bumper lighting — mount plus 3-light Cree bar (~110W, ~13,200 lm). Completes the forward coverage alongside roof and side lights.

View Product →
Compatibility: INEOS Grenadier (all trims, 2023–current). Recommended connection: EXT3 rooftop DTP port. 2-Light Kit includes DTP splitter — 2 × 30W (60W combined) from a single port.

Frequently Bought Together

Total price$960.00

Complementary products